Bradenton
Motorsports Park |
|
Class
Rules |
|
10.5
TIRE |
|
| General Class Rules - 10.5 Tire (Heads Up) | ||
1. |
Stock style and general shape car bodies. | |
2. |
Must have mufflers. | |
3. |
Must have working headlights & taillights. | |
4. |
Must have diaper. | |
5. |
Slicks limited to 33 x 10.5 designation on tire. | |
6. |
18.5 DOT tire | |
7. |
Firewall must be in stock location. | |
8. |
Must retain stock wheelbase | |
9. |
All IHRA Safety Rules Apply. | |
. |
||
| Car & Driver Weights - Small Block | ||
| 1. | Naturaly aspirated. | 2150 lbs |
| 2. | Nitrous. | 2200 lbs |
| 3. | Turbo- single. | 2600 lbs |
| 4. | Twins- up to 94mm Twins- larger than 94mm |
2800 lbs 2900 lbs |
| 5. | Centrifugal Supercharger and Roots | 2600 lbs |
| 6. | Twin Centrifugal Superchargers | 2800 lbs |
| Car & Driver Weights - Big Block | ||
| 1. | Naturally aspirated. | 2500 lbs |
| 2. | Nitrous. Nitrous- 4.840 & 4.90 Bore center (632’s) |
2700 lbs 2600 lbs |
| 3. | Turbo- Single | 2700 lbs |
| 4. | Twins - up to 94mm Max bore spacing
on all forces induction applications is 5” and
Max cubic inch on all forced induction combos is 700 cid. Any forced
induction at 5.300" bore spacing, add 100 lbs. |
3000 lbs 3100 lbs 2800 lbs 3200 lbs |
Screw superchargers: Deduct 50 lbs. for smaller than 530cid. |
||
| Supercharger restraint system meeting SFI 14.1 mandatory
on roots-type supercharger. Screw-type supercharger must meet SFI Spec 34.1 and be re-inspected by the manufacturer every three years. For screw-type superchargers, manifold burst panel meeting SFI Spec 23.1 (in addition to panel in supercharger) Plus restraint system meeting SFI Spec 14.21 Mandatory. Supercharger drive must be belt, NHRA-accepted chain driver or NHRA-accepted gear drive. Supercharger restraint straps must be covered with a fire-resistant material. The supercharger restraint straps and fuel lines must be installed such that when the restraint straps are fully extended, no load is placed on any of the fuel lines, See General Regulations 1.10 |
||
| Car & Driver Weights - 4 Cylinder or Rotary | ||
| 1. | Turbo or nitrous. | 2200 lbs |
| Car & Driver Weights - V6 Powered / inline | ||
| 1. | Nitrous. | 2200 lbs |
| 2. | Turbo. | 2300 lbs |
| 11/14/11 | ||